Why can't tree fully list /sys/class/hwmon? And how could I do that?
If I understand correctly, in Linux, everything is a path, right down to each piece of hardware. I am trying to get information about how my sensors are structured, so I thought I would just use tree to map out all the things in my hwmon directory. However, tree does not behave the same with this directory as I am accustomed to.
When I run tree on a normal directory, I get the subdirectory structure without using the -R or -L flags:
$ tree /home
/home
└── boss
├── clones
├── Desktop
├── Documents
│ ├── modules.txt
│ ├── old_docs
│ │ └── assorted
│ └── prepscript.txt
├── Downloads
├── Music
├── Pictures
├── Public
├── Templates
└── Videos
12 directories, 2 files
but I try to do the same with HWmon, it only goes one level deep, even if I do use the -R flag and even though there is stuff deeper:
$ tree /sys/class/hwmon/
/sys/class/hwmon/
├── hwmon0 -> ../../devices/pci0000:40/0000:40:01.3/0000:43:00.0/hwmon/hwmon0
├── hwmon1 -> ../../devices/pci0000:00/0000:00:01.3/0000:09:00.0/hwmon/hwmon1
├── hwmon2 -> ../../devices/pci0000:40/0000:40:03.1/0000:44:00.0/hwmon/hwmon2
├── hwmon3 -> ../../devices/pci0000:00/0000:00:18.3/hwmon/hwmon3
├── hwmon4 -> ../../devices/pci0000:00/0000:00:19.3/hwmon/hwmon4
├── hwmon5 -> ../../devices/virtual/thermal/thermal_zone0/hwmon5
└── hwmon6 -> ../../devices/platform/nct6775.656/hwmon/hwmon6
7 directories, 0 files
$ tree /sys/class/hwmon/hwmon0
/sys/class/hwmon/hwmon0
├── device -> ../../../0000:43:00.0
├── fan1_input
├── name
├── power
│ ├── async
│ ├── autosuspend_delay_ms
│ ├── control
│ ├── runtime_active_kids
│ ├── runtime_active_time
│ ├── runtime_enabled
│ ├── runtime_status
│ ├── runtime_suspended_time
│ └── runtime_usage
├── pwm1
├── pwm1_enable
├── pwm1_max
├── pwm1_min
├── subsystem -> ../../../../../../class/hwmon
├── temp1_auto_point1_pwm
├── temp1_auto_point1_temp
├── temp1_auto_point1_temp_hyst
├── temp1_crit
├── temp1_crit_hyst
├── temp1_emergency
├── temp1_emergency_hyst
├── temp1_input
├── temp1_max
├── temp1_max_hyst
├── uevent
└── update_interval
3 directories, 27 files
What causes this difference in behavior, and can I just get a simple tree of all the devices?
sysfs tree sensors
add a comment |
If I understand correctly, in Linux, everything is a path, right down to each piece of hardware. I am trying to get information about how my sensors are structured, so I thought I would just use tree to map out all the things in my hwmon directory. However, tree does not behave the same with this directory as I am accustomed to.
When I run tree on a normal directory, I get the subdirectory structure without using the -R or -L flags:
$ tree /home
/home
└── boss
├── clones
├── Desktop
├── Documents
│ ├── modules.txt
│ ├── old_docs
│ │ └── assorted
│ └── prepscript.txt
├── Downloads
├── Music
├── Pictures
├── Public
├── Templates
└── Videos
12 directories, 2 files
but I try to do the same with HWmon, it only goes one level deep, even if I do use the -R flag and even though there is stuff deeper:
$ tree /sys/class/hwmon/
/sys/class/hwmon/
├── hwmon0 -> ../../devices/pci0000:40/0000:40:01.3/0000:43:00.0/hwmon/hwmon0
├── hwmon1 -> ../../devices/pci0000:00/0000:00:01.3/0000:09:00.0/hwmon/hwmon1
├── hwmon2 -> ../../devices/pci0000:40/0000:40:03.1/0000:44:00.0/hwmon/hwmon2
├── hwmon3 -> ../../devices/pci0000:00/0000:00:18.3/hwmon/hwmon3
├── hwmon4 -> ../../devices/pci0000:00/0000:00:19.3/hwmon/hwmon4
├── hwmon5 -> ../../devices/virtual/thermal/thermal_zone0/hwmon5
└── hwmon6 -> ../../devices/platform/nct6775.656/hwmon/hwmon6
7 directories, 0 files
$ tree /sys/class/hwmon/hwmon0
/sys/class/hwmon/hwmon0
├── device -> ../../../0000:43:00.0
├── fan1_input
├── name
├── power
│ ├── async
│ ├── autosuspend_delay_ms
│ ├── control
│ ├── runtime_active_kids
│ ├── runtime_active_time
│ ├── runtime_enabled
│ ├── runtime_status
│ ├── runtime_suspended_time
│ └── runtime_usage
├── pwm1
├── pwm1_enable
├── pwm1_max
├── pwm1_min
├── subsystem -> ../../../../../../class/hwmon
├── temp1_auto_point1_pwm
├── temp1_auto_point1_temp
├── temp1_auto_point1_temp_hyst
├── temp1_crit
├── temp1_crit_hyst
├── temp1_emergency
├── temp1_emergency_hyst
├── temp1_input
├── temp1_max
├── temp1_max_hyst
├── uevent
└── update_interval
3 directories, 27 files
What causes this difference in behavior, and can I just get a simple tree of all the devices?
sysfs tree sensors
add a comment |
If I understand correctly, in Linux, everything is a path, right down to each piece of hardware. I am trying to get information about how my sensors are structured, so I thought I would just use tree to map out all the things in my hwmon directory. However, tree does not behave the same with this directory as I am accustomed to.
When I run tree on a normal directory, I get the subdirectory structure without using the -R or -L flags:
$ tree /home
/home
└── boss
├── clones
├── Desktop
├── Documents
│ ├── modules.txt
│ ├── old_docs
│ │ └── assorted
│ └── prepscript.txt
├── Downloads
├── Music
├── Pictures
├── Public
├── Templates
└── Videos
12 directories, 2 files
but I try to do the same with HWmon, it only goes one level deep, even if I do use the -R flag and even though there is stuff deeper:
$ tree /sys/class/hwmon/
/sys/class/hwmon/
├── hwmon0 -> ../../devices/pci0000:40/0000:40:01.3/0000:43:00.0/hwmon/hwmon0
├── hwmon1 -> ../../devices/pci0000:00/0000:00:01.3/0000:09:00.0/hwmon/hwmon1
├── hwmon2 -> ../../devices/pci0000:40/0000:40:03.1/0000:44:00.0/hwmon/hwmon2
├── hwmon3 -> ../../devices/pci0000:00/0000:00:18.3/hwmon/hwmon3
├── hwmon4 -> ../../devices/pci0000:00/0000:00:19.3/hwmon/hwmon4
├── hwmon5 -> ../../devices/virtual/thermal/thermal_zone0/hwmon5
└── hwmon6 -> ../../devices/platform/nct6775.656/hwmon/hwmon6
7 directories, 0 files
$ tree /sys/class/hwmon/hwmon0
/sys/class/hwmon/hwmon0
├── device -> ../../../0000:43:00.0
├── fan1_input
├── name
├── power
│ ├── async
│ ├── autosuspend_delay_ms
│ ├── control
│ ├── runtime_active_kids
│ ├── runtime_active_time
│ ├── runtime_enabled
│ ├── runtime_status
│ ├── runtime_suspended_time
│ └── runtime_usage
├── pwm1
├── pwm1_enable
├── pwm1_max
├── pwm1_min
├── subsystem -> ../../../../../../class/hwmon
├── temp1_auto_point1_pwm
├── temp1_auto_point1_temp
├── temp1_auto_point1_temp_hyst
├── temp1_crit
├── temp1_crit_hyst
├── temp1_emergency
├── temp1_emergency_hyst
├── temp1_input
├── temp1_max
├── temp1_max_hyst
├── uevent
└── update_interval
3 directories, 27 files
What causes this difference in behavior, and can I just get a simple tree of all the devices?
sysfs tree sensors
If I understand correctly, in Linux, everything is a path, right down to each piece of hardware. I am trying to get information about how my sensors are structured, so I thought I would just use tree to map out all the things in my hwmon directory. However, tree does not behave the same with this directory as I am accustomed to.
When I run tree on a normal directory, I get the subdirectory structure without using the -R or -L flags:
$ tree /home
/home
└── boss
├── clones
├── Desktop
├── Documents
│ ├── modules.txt
│ ├── old_docs
│ │ └── assorted
│ └── prepscript.txt
├── Downloads
├── Music
├── Pictures
├── Public
├── Templates
└── Videos
12 directories, 2 files
but I try to do the same with HWmon, it only goes one level deep, even if I do use the -R flag and even though there is stuff deeper:
$ tree /sys/class/hwmon/
/sys/class/hwmon/
├── hwmon0 -> ../../devices/pci0000:40/0000:40:01.3/0000:43:00.0/hwmon/hwmon0
├── hwmon1 -> ../../devices/pci0000:00/0000:00:01.3/0000:09:00.0/hwmon/hwmon1
├── hwmon2 -> ../../devices/pci0000:40/0000:40:03.1/0000:44:00.0/hwmon/hwmon2
├── hwmon3 -> ../../devices/pci0000:00/0000:00:18.3/hwmon/hwmon3
├── hwmon4 -> ../../devices/pci0000:00/0000:00:19.3/hwmon/hwmon4
├── hwmon5 -> ../../devices/virtual/thermal/thermal_zone0/hwmon5
└── hwmon6 -> ../../devices/platform/nct6775.656/hwmon/hwmon6
7 directories, 0 files
$ tree /sys/class/hwmon/hwmon0
/sys/class/hwmon/hwmon0
├── device -> ../../../0000:43:00.0
├── fan1_input
├── name
├── power
│ ├── async
│ ├── autosuspend_delay_ms
│ ├── control
│ ├── runtime_active_kids
│ ├── runtime_active_time
│ ├── runtime_enabled
│ ├── runtime_status
│ ├── runtime_suspended_time
│ └── runtime_usage
├── pwm1
├── pwm1_enable
├── pwm1_max
├── pwm1_min
├── subsystem -> ../../../../../../class/hwmon
├── temp1_auto_point1_pwm
├── temp1_auto_point1_temp
├── temp1_auto_point1_temp_hyst
├── temp1_crit
├── temp1_crit_hyst
├── temp1_emergency
├── temp1_emergency_hyst
├── temp1_input
├── temp1_max
├── temp1_max_hyst
├── uevent
└── update_interval
3 directories, 27 files
What causes this difference in behavior, and can I just get a simple tree of all the devices?
sysfs tree sensors
sysfs tree sensors
edited Dec 2 '18 at 21:55
Rui F Ribeiro
39k1479129
39k1479129
asked Dec 2 '18 at 20:10
Thoughtcraft
1619
1619
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
tree
behaves that way because it doesn’t dereference symlinks by default. The -l
option will change that:
tree -l /sys/class/hwmon/
but you’ll have fun making sense of all the output.
Wow, that is indeed some confusing output. Is there a way to get the structure as it would appear if I browsed through it?
– Thoughtcraft
Dec 2 '18 at 20:22
2
@Thoughtcraft the problem is mostly because thedevice
link goes up the tree (to the parent device), therefore this command shows the entire device tree, not just a few subtrees. I guess you can do e.g.tree -d /sys/class/hwmon/*/
to show the directory structure and symlinks to directories, and chase thedevice
links yourself.
– sourcejedi
Dec 2 '18 at 21:06
Awesome, if I want to go deeper I can keep adding stars like:tree -d -R /sys/class/hwmon/*/*/ */*
– Thoughtcraft
Dec 2 '18 at 21:14
Might want to check for infinite loops.
– Joshua
Dec 3 '18 at 0:48
1
@Joshuatree -l
does that on its own.
– Stephen Kitt
Dec 3 '18 at 5:13
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f485548%2fwhy-cant-tree-fully-list-sys-class-hwmon-and-how-could-i-do-that%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
tree
behaves that way because it doesn’t dereference symlinks by default. The -l
option will change that:
tree -l /sys/class/hwmon/
but you’ll have fun making sense of all the output.
Wow, that is indeed some confusing output. Is there a way to get the structure as it would appear if I browsed through it?
– Thoughtcraft
Dec 2 '18 at 20:22
2
@Thoughtcraft the problem is mostly because thedevice
link goes up the tree (to the parent device), therefore this command shows the entire device tree, not just a few subtrees. I guess you can do e.g.tree -d /sys/class/hwmon/*/
to show the directory structure and symlinks to directories, and chase thedevice
links yourself.
– sourcejedi
Dec 2 '18 at 21:06
Awesome, if I want to go deeper I can keep adding stars like:tree -d -R /sys/class/hwmon/*/*/ */*
– Thoughtcraft
Dec 2 '18 at 21:14
Might want to check for infinite loops.
– Joshua
Dec 3 '18 at 0:48
1
@Joshuatree -l
does that on its own.
– Stephen Kitt
Dec 3 '18 at 5:13
add a comment |
tree
behaves that way because it doesn’t dereference symlinks by default. The -l
option will change that:
tree -l /sys/class/hwmon/
but you’ll have fun making sense of all the output.
Wow, that is indeed some confusing output. Is there a way to get the structure as it would appear if I browsed through it?
– Thoughtcraft
Dec 2 '18 at 20:22
2
@Thoughtcraft the problem is mostly because thedevice
link goes up the tree (to the parent device), therefore this command shows the entire device tree, not just a few subtrees. I guess you can do e.g.tree -d /sys/class/hwmon/*/
to show the directory structure and symlinks to directories, and chase thedevice
links yourself.
– sourcejedi
Dec 2 '18 at 21:06
Awesome, if I want to go deeper I can keep adding stars like:tree -d -R /sys/class/hwmon/*/*/ */*
– Thoughtcraft
Dec 2 '18 at 21:14
Might want to check for infinite loops.
– Joshua
Dec 3 '18 at 0:48
1
@Joshuatree -l
does that on its own.
– Stephen Kitt
Dec 3 '18 at 5:13
add a comment |
tree
behaves that way because it doesn’t dereference symlinks by default. The -l
option will change that:
tree -l /sys/class/hwmon/
but you’ll have fun making sense of all the output.
tree
behaves that way because it doesn’t dereference symlinks by default. The -l
option will change that:
tree -l /sys/class/hwmon/
but you’ll have fun making sense of all the output.
answered Dec 2 '18 at 20:19
Stephen Kitt
164k24365444
164k24365444
Wow, that is indeed some confusing output. Is there a way to get the structure as it would appear if I browsed through it?
– Thoughtcraft
Dec 2 '18 at 20:22
2
@Thoughtcraft the problem is mostly because thedevice
link goes up the tree (to the parent device), therefore this command shows the entire device tree, not just a few subtrees. I guess you can do e.g.tree -d /sys/class/hwmon/*/
to show the directory structure and symlinks to directories, and chase thedevice
links yourself.
– sourcejedi
Dec 2 '18 at 21:06
Awesome, if I want to go deeper I can keep adding stars like:tree -d -R /sys/class/hwmon/*/*/ */*
– Thoughtcraft
Dec 2 '18 at 21:14
Might want to check for infinite loops.
– Joshua
Dec 3 '18 at 0:48
1
@Joshuatree -l
does that on its own.
– Stephen Kitt
Dec 3 '18 at 5:13
add a comment |
Wow, that is indeed some confusing output. Is there a way to get the structure as it would appear if I browsed through it?
– Thoughtcraft
Dec 2 '18 at 20:22
2
@Thoughtcraft the problem is mostly because thedevice
link goes up the tree (to the parent device), therefore this command shows the entire device tree, not just a few subtrees. I guess you can do e.g.tree -d /sys/class/hwmon/*/
to show the directory structure and symlinks to directories, and chase thedevice
links yourself.
– sourcejedi
Dec 2 '18 at 21:06
Awesome, if I want to go deeper I can keep adding stars like:tree -d -R /sys/class/hwmon/*/*/ */*
– Thoughtcraft
Dec 2 '18 at 21:14
Might want to check for infinite loops.
– Joshua
Dec 3 '18 at 0:48
1
@Joshuatree -l
does that on its own.
– Stephen Kitt
Dec 3 '18 at 5:13
Wow, that is indeed some confusing output. Is there a way to get the structure as it would appear if I browsed through it?
– Thoughtcraft
Dec 2 '18 at 20:22
Wow, that is indeed some confusing output. Is there a way to get the structure as it would appear if I browsed through it?
– Thoughtcraft
Dec 2 '18 at 20:22
2
2
@Thoughtcraft the problem is mostly because the
device
link goes up the tree (to the parent device), therefore this command shows the entire device tree, not just a few subtrees. I guess you can do e.g. tree -d /sys/class/hwmon/*/
to show the directory structure and symlinks to directories, and chase the device
links yourself.– sourcejedi
Dec 2 '18 at 21:06
@Thoughtcraft the problem is mostly because the
device
link goes up the tree (to the parent device), therefore this command shows the entire device tree, not just a few subtrees. I guess you can do e.g. tree -d /sys/class/hwmon/*/
to show the directory structure and symlinks to directories, and chase the device
links yourself.– sourcejedi
Dec 2 '18 at 21:06
Awesome, if I want to go deeper I can keep adding stars like:
tree -d -R /sys/class/hwmon/*/*/ */*
– Thoughtcraft
Dec 2 '18 at 21:14
Awesome, if I want to go deeper I can keep adding stars like:
tree -d -R /sys/class/hwmon/*/*/ */*
– Thoughtcraft
Dec 2 '18 at 21:14
Might want to check for infinite loops.
– Joshua
Dec 3 '18 at 0:48
Might want to check for infinite loops.
– Joshua
Dec 3 '18 at 0:48
1
1
@Joshua
tree -l
does that on its own.– Stephen Kitt
Dec 3 '18 at 5:13
@Joshua
tree -l
does that on its own.– Stephen Kitt
Dec 3 '18 at 5:13
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f485548%2fwhy-cant-tree-fully-list-sys-class-hwmon-and-how-could-i-do-that%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown