One Point Compactification of $mathbf{R}^n-{0}$
up vote
0
down vote
favorite
I wanted to know the one point compactification of $mathbf{R}^n-{0}$. The actual problem asks to show that $S^n/{p,q} simeq S^n vee S^1$, where $p,q$ are two distinct points of $S^n$. I know that $S^n-{p,q}$ is homeomorphic to the one point compactification of $mathbf{R}^n-{0}$. So, knowing the result might help to solve the problem. Intuition from $mathbf{R}-{0}$ is not helping much as that is $S^1vee S^1$ and I couldn't work out for even $n=2$. Please help.
general-topology algebraic-topology
asked Nov 24 at 15:33
PSG
1999
add a comment |
up vote
0
down vote
favorite
I wanted to know the one point compactification of $mathbf{R}^n-{0}$. The actual problem asks to show that $S^n/{p,q} simeq S^n vee S^1$, where $p,q$ are two distinct points of $S^n$. I know that $S^n-{p,q}$ is homeomorphic to the one point compactification of $mathbf{R}^n-{0}$. So, knowing the result might help to solve the problem. Intuition from $mathbf{R}-{0}$ is not helping much as that is $S^1vee S^1$ and I couldn't work out for even $n=2$. Please help.
general-topology algebraic-topology
asked Nov 24 at 15:33
PSG
1999
In general, the way to make a one-point compactification is to identify the limits of all sequences that you really want to converge. In this case, it would be adding a point at infinity and identifying it with $0$. If you think about the sphere $S^n$ and stereographic projection, this would correspond to identifying the north and south poles.
– Michael Burr
Nov 24 at 15:36
Ok, is it a known space? My guess would be something involved with wedge product.
– PSG
Nov 24 at 15:39
Perhaps the example on page 11 on Hatcher's Algebraic Topology would be helpful.
– Michael Burr
Nov 24 at 15:45
Sorry, I am not really comfortable with CW-Cells. Is there a solution with precise maps?
– PSG
Nov 24 at 15:52
add a comment |
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I wanted to know the one point compactification of $mathbf{R}^n-{0}$. The actual problem asks to show that $S^n/{p,q} simeq S^n vee S^1$, where $p,q$ are two distinct points of $S^n$. I know that $S^n-{p,q}$ is homeomorphic to the one point compactification of $mathbf{R}^n-{0}$. So, knowing the result might help to solve the problem. Intuition from $mathbf{R}-{0}$ is not helping much as that is $S^1vee S^1$ and I couldn't work out for even $n=2$. Please help.
general-topology algebraic-topology
asked Nov 24 at 15:33
PSG
1999
I wanted to know the one point compactification of $mathbf{R}^n-{0}$. The actual problem asks to show that $S^n/{p,q} simeq S^n vee S^1$, where $p,q$ are two distinct points of $S^n$. I know that $S^n-{p,q}$ is homeomorphic to the one point compactification of $mathbf{R}^n-{0}$. So, knowing the result might help to solve the problem. Intuition from $mathbf{R}-{0}$ is not helping much as that is $S^1vee S^1$ and I couldn't work out for even $n=2$. Please help.
general-topology algebraic-topology
general-topology algebraic-topology
asked Nov 24 at 15:33
PSG
1999
asked Nov 24 at 15:33
PSG
1999
asked Nov 24 at 15:33
PSG
1999
asked Nov 24 at 15:33
PSG
1999
asked Nov 24 at 15:33
PSG
1999
1999
In general, the way to make a one-point compactification is to identify the limits of all sequences that you really want to converge. In this case, it would be adding a point at infinity and identifying it with $0$. If you think about the sphere $S^n$ and stereographic projection, this would correspond to identifying the north and south poles.
– Michael Burr
Nov 24 at 15:36
Ok, is it a known space? My guess would be something involved with wedge product.
– PSG
Nov 24 at 15:39
Perhaps the example on page 11 on Hatcher's Algebraic Topology would be helpful.
– Michael Burr
Nov 24 at 15:45
Sorry, I am not really comfortable with CW-Cells. Is there a solution with precise maps?
– PSG
Nov 24 at 15:52
add a comment |
In general, the way to make a one-point compactification is to identify the limits of all sequences that you really want to converge. In this case, it would be adding a point at infinity and identifying it with $0$. If you think about the sphere $S^n$ and stereographic projection, this would correspond to identifying the north and south poles.
– Michael Burr
Nov 24 at 15:36
Ok, is it a known space? My guess would be something involved with wedge product.
– PSG
Nov 24 at 15:39
Perhaps the example on page 11 on Hatcher's Algebraic Topology would be helpful.
– Michael Burr
Nov 24 at 15:45
Sorry, I am not really comfortable with CW-Cells. Is there a solution with precise maps?
– PSG
Nov 24 at 15:52
In general, the way to make a one-point compactification is to identify the limits of all sequences that you really want to converge. In this case, it would be adding a point at infinity and identifying it with $0$. If you think about the sphere $S^n$ and stereographic projection, this would correspond to identifying the north and south poles.
– Michael Burr
Nov 24 at 15:36
In general, the way to make a one-point compactification is to identify the limits of all sequences that you really want to converge. In this case, it would be adding a point at infinity and identifying it with $0$. If you think about the sphere $S^n$ and stereographic projection, this would correspond to identifying the north and south poles.
– Michael Burr
Nov 24 at 15:36
Ok, is it a known space? My guess would be something involved with wedge product.
– PSG
Nov 24 at 15:39
Ok, is it a known space? My guess would be something involved with wedge product.
– PSG
Nov 24 at 15:39
Perhaps the example on page 11 on Hatcher's Algebraic Topology would be helpful.
– Michael Burr
Nov 24 at 15:45
Perhaps the example on page 11 on Hatcher's Algebraic Topology would be helpful.
– Michael Burr
Nov 24 at 15:45
Sorry, I am not really comfortable with CW-Cells. Is there a solution with precise maps?
– PSG
Nov 24 at 15:52
Sorry, I am not really comfortable with CW-Cells. Is there a solution with precise maps?
– PSG
Nov 24 at 15:52
add a comment |
1 Answer
1
active
oldest
votes
up vote
1
down vote
By stereographic projection, you can turn $Bbb R^n-{0}$ into $S^n-{N,S}$. You want to make this compact by adding a single point. We wish to add $N$ to fix problems near the north pole and $S$ for problems near the south pole. So to solve both problems at once, we "pinch" $N$ and $S$ together and then only add a single point...
answered Nov 24 at 15:39
Hagen von Eitzen
274k21266494
I got the idea, so what would be the final space?
– PSG
Nov 24 at 15:41
1
@PSG A sphere with the north and south poles identified. This is homotopy equivalent to the sphere with a circle attached at a point.
– Aleksandar Milivojevic
Nov 24 at 15:45
For $S^1$ , I can see that if we pinch the $N$ and $S$ together we get $S^1vee S^1$, it's difficult to see in higher dimension , maybe you can give a closed form of the space. Is it $S^nvee S^1$?
– PSG
Nov 24 at 15:46
1
Draw a line from N to S through the “hole” in the sphere. (Contracting the line gives you pinching, but now we want the line to be there.) Now move N along the sphere over to S, and see that the line becomes a circle.
– Aleksandar Milivojevic
Nov 24 at 15:58
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
1
down vote
By stereographic projection, you can turn $Bbb R^n-{0}$ into $S^n-{N,S}$. You want to make this compact by adding a single point. We wish to add $N$ to fix problems near the north pole and $S$ for problems near the south pole. So to solve both problems at once, we "pinch" $N$ and $S$ together and then only add a single point...
answered Nov 24 at 15:39
Hagen von Eitzen
274k21266494
I got the idea, so what would be the final space?
– PSG
Nov 24 at 15:41
1
@PSG A sphere with the north and south poles identified. This is homotopy equivalent to the sphere with a circle attached at a point.
– Aleksandar Milivojevic
Nov 24 at 15:45
For $S^1$ , I can see that if we pinch the $N$ and $S$ together we get $S^1vee S^1$, it's difficult to see in higher dimension , maybe you can give a closed form of the space. Is it $S^nvee S^1$?
– PSG
Nov 24 at 15:46
1
Draw a line from N to S through the “hole” in the sphere. (Contracting the line gives you pinching, but now we want the line to be there.) Now move N along the sphere over to S, and see that the line becomes a circle.
– Aleksandar Milivojevic
Nov 24 at 15:58
add a comment |
up vote
1
down vote
By stereographic projection, you can turn $Bbb R^n-{0}$ into $S^n-{N,S}$. You want to make this compact by adding a single point. We wish to add $N$ to fix problems near the north pole and $S$ for problems near the south pole. So to solve both problems at once, we "pinch" $N$ and $S$ together and then only add a single point...
answered Nov 24 at 15:39
Hagen von Eitzen
274k21266494
I got the idea, so what would be the final space?
– PSG
Nov 24 at 15:41
1
@PSG A sphere with the north and south poles identified. This is homotopy equivalent to the sphere with a circle attached at a point.
– Aleksandar Milivojevic
Nov 24 at 15:45
For $S^1$ , I can see that if we pinch the $N$ and $S$ together we get $S^1vee S^1$, it's difficult to see in higher dimension , maybe you can give a closed form of the space. Is it $S^nvee S^1$?
– PSG
Nov 24 at 15:46
1
Draw a line from N to S through the “hole” in the sphere. (Contracting the line gives you pinching, but now we want the line to be there.) Now move N along the sphere over to S, and see that the line becomes a circle.
– Aleksandar Milivojevic
Nov 24 at 15:58
add a comment |
up vote
1
down vote
up vote
1
down vote
By stereographic projection, you can turn $Bbb R^n-{0}$ into $S^n-{N,S}$. You want to make this compact by adding a single point. We wish to add $N$ to fix problems near the north pole and $S$ for problems near the south pole. So to solve both problems at once, we "pinch" $N$ and $S$ together and then only add a single point...
answered Nov 24 at 15:39
Hagen von Eitzen
274k21266494
By stereographic projection, you can turn $Bbb R^n-{0}$ into $S^n-{N,S}$. You want to make this compact by adding a single point. We wish to add $N$ to fix problems near the north pole and $S$ for problems near the south pole. So to solve both problems at once, we "pinch" $N$ and $S$ together and then only add a single point...
answered Nov 24 at 15:39
Hagen von Eitzen
274k21266494
answered Nov 24 at 15:39
Hagen von Eitzen
274k21266494
answered Nov 24 at 15:39
Hagen von Eitzen
274k21266494
answered Nov 24 at 15:39
Hagen von Eitzen
274k21266494
274k21266494
I got the idea, so what would be the final space?
– PSG
Nov 24 at 15:41
1
@PSG A sphere with the north and south poles identified. This is homotopy equivalent to the sphere with a circle attached at a point.
– Aleksandar Milivojevic
Nov 24 at 15:45
For $S^1$ , I can see that if we pinch the $N$ and $S$ together we get $S^1vee S^1$, it's difficult to see in higher dimension , maybe you can give a closed form of the space. Is it $S^nvee S^1$?
– PSG
Nov 24 at 15:46
1
Draw a line from N to S through the “hole” in the sphere. (Contracting the line gives you pinching, but now we want the line to be there.) Now move N along the sphere over to S, and see that the line becomes a circle.
– Aleksandar Milivojevic
Nov 24 at 15:58
add a comment |
I got the idea, so what would be the final space?
– PSG
Nov 24 at 15:41
1
@PSG A sphere with the north and south poles identified. This is homotopy equivalent to the sphere with a circle attached at a point.
– Aleksandar Milivojevic
Nov 24 at 15:45
For $S^1$ , I can see that if we pinch the $N$ and $S$ together we get $S^1vee S^1$, it's difficult to see in higher dimension , maybe you can give a closed form of the space. Is it $S^nvee S^1$?
– PSG
Nov 24 at 15:46
1
Draw a line from N to S through the “hole” in the sphere. (Contracting the line gives you pinching, but now we want the line to be there.) Now move N along the sphere over to S, and see that the line becomes a circle.
– Aleksandar Milivojevic
Nov 24 at 15:58
I got the idea, so what would be the final space?
– PSG
Nov 24 at 15:41
I got the idea, so what would be the final space?
– PSG
Nov 24 at 15:41
1
1
@PSG A sphere with the north and south poles identified. This is homotopy equivalent to the sphere with a circle attached at a point.
– Aleksandar Milivojevic
Nov 24 at 15:45
@PSG A sphere with the north and south poles identified. This is homotopy equivalent to the sphere with a circle attached at a point.
– Aleksandar Milivojevic
Nov 24 at 15:45
For $S^1$ , I can see that if we pinch the $N$ and $S$ together we get $S^1vee S^1$, it's difficult to see in higher dimension , maybe you can give a closed form of the space. Is it $S^nvee S^1$?
– PSG
Nov 24 at 15:46
For $S^1$ , I can see that if we pinch the $N$ and $S$ together we get $S^1vee S^1$, it's difficult to see in higher dimension , maybe you can give a closed form of the space. Is it $S^nvee S^1$?
– PSG
Nov 24 at 15:46
1
1
Draw a line from N to S through the “hole” in the sphere. (Contracting the line gives you pinching, but now we want the line to be there.) Now move N along the sphere over to S, and see that the line becomes a circle.
– Aleksandar Milivojevic
Nov 24 at 15:58
Draw a line from N to S through the “hole” in the sphere. (Contracting the line gives you pinching, but now we want the line to be there.) Now move N along the sphere over to S, and see that the line becomes a circle.
– Aleksandar Milivojevic
Nov 24 at 15:58
add a comment |
Thanks for contributing an answer to Mathematics Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmath.stackexchange.com%2fquestions%2f3011689%2fone-point-compactification-of-mathbfrn-0%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
In general, the way to make a one-point compactification is to identify the limits of all sequences that you really want to converge. In this case, it would be adding a point at infinity and identifying it with $0$. If you think about the sphere $S^n$ and stereographic projection, this would correspond to identifying the north and south poles.
– Michael Burr
Nov 24 at 15:36
Ok, is it a known space? My guess would be something involved with wedge product.
– PSG
Nov 24 at 15:39
Perhaps the example on page 11 on Hatcher's Algebraic Topology would be helpful.
– Michael Burr
Nov 24 at 15:45
Sorry, I am not really comfortable with CW-Cells. Is there a solution with precise maps?
– PSG
Nov 24 at 15:52